SFMS
Search


Home

SFMS
Path: Home>Products>Level Sensors


AMETEK makes liquid level sensors for any liquids found on aircraft:

  • Oil
  • Hydraulic Fluid
  • Fuel
  • Water
  • Waste
Oil Level Sensors

8TJ209 Capacitive Oil Level Sensor Datasheet

Capacitive Technology Complements AMETEK's Existing Designs 

AMETEK is the world leader in the design and manufacture of aircraft engine lube oil sensing devices. Introduced in the 1960s, AMETEK’s potentiometric devices continue to be selected for their accuracy, value and reliability. With the introduction of a capacitive device, AMETEK is now able to offer a complementary technology for those applications where existing interfaces and continuous resolution are key factors.

The AMETEK family of oil level sensor products is the unquestioned choice for today’s challenging engine applications. 

Applied On Enginess Around The World 

The AMETEK 8TJ209 series of oil level sensors have been selected for business, regional and fighter applications since their introduction in 2000. The basic design can be easily adapted and qualified for new applications. Development cycle times are measured in weeks. Furthermore, to improve reliability of existing aircraft, AMETEK transmitters are readily adaptable to retrofit older engine lubrication systems. The design is ideal for small engine and auxiliary power unit applications where weight and size constraints are major factors. 

Proven Sensing Interface Along With Simple Construction 

The Capacitance Level Sensor produces a DC current signal proportional to fluid level when excited with 20 VAC at 30 KHz. Two concentric aluminum tubes along the length of the sensor form a variable capacitance circuit. The tube electrodes are isolated from each other using a molded RYTONTM insulator. The electrical capacitance of the tubes increases with the rising height of oil due to the higher dielectric constant of the oil compared to air.

Along with AC excitation, AMETEK’s variable capacitor and printed wiring board mounted high temperature, dual-diode circuit design produces a half-wave rectified current that when filtered by the purchaser’s signal conditioning circuit yields a DC current proportional to level. Two diodes convert the AC signal to a DC current, and make the output insensitive to cable capacitance. With this approach, there is no high impedance circuit to carefully shield.
Regional Sales Manager
US East / Canada East / Latam
Mark Samways 
mark.samways@ametek.com
Tel: +1-978-430-7129

US West / Canada West
Tim Murphy
tim.murphy@ametek.com
Tel: +1-949-388-3648
Europe / Middle East / Africa / India
Sara Bustillo
sara.bustillo@ametek.com
Tel: +33 6 07768196

Asia Pacific
Joe Winnay
joe.winnay@ametek.com
Tel: +1-978-764-1493

Distribution & Service Sales Director
Dale Gobeille
dale.gobeille@ametek.com
Tel: +1-267-933-2161
Global Distribution & Military Sales Manager
Paul West
paul.west@ametek.com
Tel: +1-978-729-7154
About Us - Data Sheets - News & Events - Contact Us - Service Center
©Copyright 2012 AMETEK, Inc. All Rights Reserved
privacy policy - trademarks - sitemap